Single And Double Girder Overhead Crane 35 Tonnes

A 35-ton overhead crane is a robust and essential piece of material handling equipment designed for heavy-duty industrial applications.

Capacité: Jusqu'à 35 Tonnes
Bridge Span: Jusqu'à 30 mètres (~100 ft)
Hauteur de levage: Jusqu'à 30 mètres (~100 ft)
Vitesse de levage: 0.8 - 3.2 m / mon (2.6 - 10.5 pieds/min)

Envoyer un e-mail Discuter maintenant

Table des matières Montrer

Introduction to 35-Ton Overhead Cranes

Whether you choose a single or double girder configuration, these cranes provide the strength, fiabilité, and precision needed to move massive loads safely and efficiently in factories, entrepôts, foundries, and steel yards. Understanding the differences between single and double girder designs is crucial for selecting the right crane for your operational needs.

single and double girder overhead crane 35 tonnes

Pont roulant monopoutre 35 Tonnes: Efficiency and Economy

Pont roulant monopoutre 35 Tonnes

The single girder overhead crane is characterized by a single bridge beam supported by two end trucks. The hoist and trolley operate on the bottom flange of the girder.

Principales fonctionnalités & Avantages:

1. Rentabilité: Requires less material to manufacture, resulting in a lower initial investment and reduced operational costs for the supporting runway structure.
2. Space Efficiency: With a more compact design and lower headroom, it is ideal for facilities with height restrictions.
3. Ideal Applications: Parfait pour les ateliers, entrepôts, and manufacturing plants where lifting capacity up to 35 tons is required for standard-duty cycles. It excels in tasks that involve precise but not excessively frequent lifting.
4. Facilité d'installation & Entretien: The simpler design translates to easier installation and lower long-term maintenance requirements.

Pont roulant bipoutre 35 Tonnes: Maximum Strength and Versatility

Pont roulant bipoutre 35 Tonnes

The double girder overhead crane features two bridge beams supported by end trucks. The hoist and trolley typically run on a rail installed on the top of the girders, offering superior hook height and lifting capabilities.

Principales fonctionnalités & Avantages:

1. Hauteur de crochet supérieure: The top-running design provides significantly greater hook lift, maximizing usable vertical space in your facility—a critical factor for heavy 35-ton loads.
2. Heavier Duty Cycles: Engineered for more intense, frequent, and severe service applications. It handles the 35-ton capacity with ease and is built for higher reliability under constant use.
3. Enhanced Durability & Longevity: The dual-girder construction offers greater structural integrity, reducing deflection and ensuring smoother operation under full load.
4. Advanced Options: More readily accommodates specialized features like magnet packages, attrape, or custom lifting attachments. It also allows for easy integration of a maintenance walkway along the bridge.

Technical Parameter Table: 35-Ton Overhead Cranes

This table outlines the standard specifications for our 35-ton Single and Double Girder Overhead Cranes. All parameters can be customized to meet specific application requirements.

Catégorie	Paramètre	Grue monopoutre	Grue bipoutre
Capacité	Charge nominale	35 tonnes / 70,000 lbs	35 tonnes / 70,000 lbs
Portée	Bridge Span	Jusqu'à 30 mètres (~100 ft)	Jusqu'à 35 mètres (~115 ft) or more
Hauteur de levage	Hook Travel	Jusqu'à 30 mètres (~100 ft)	Jusqu'à 30 mètres (~100 ft) or more
Speed	Vitesse de levage	0.8 – 3.2 m / mon (2.6 – 10.5 pieds/min)	0.8 – 3.2 m / mon (2.6 – 10.5 pieds/min)
	Trolley Travelling Speed	10 – 20 m / mon (32 – 65 pieds/min)	10 – 20 m / mon (32 – 65 pieds/min)
	Bridge Travelling Speed	20 – 40 m / mon (65 – 130 pieds/min)	20 – 40 m / mon (65 – 130 pieds/min)
Contrôle	Control Mode	Contrôle suspendu / Télécommande radio	Contrôle suspendu / Télécommande radio / Taxi
Alimentation électrique		3-Phase, 50/60 HZ, 380V-480V or as per local standard	3-Phase, 50/60 HZ, 380V-480V or as per local standard
Duty Class	(FEM / ISO Standard)	FEM 1Am / ISO M4 (Medium Duty)	FEM 2m / ISO M5 (Robuste)
Ambient Temperature		-20°C to +40°C (-4°F to 104°F)	-20°C to +40°C (-4°F to 104°F)
Structural Design	Girder Type	Rolled Section / Welded Box Girder	Welded Box Girder
Headroom		Low Headroom	Standard Headroom
Safety Features	Standard	Overload Limit Switch, Emergency Stop, Limit Switches for travel (end stops), Bumpers	Overload Limit Switch, Emergency Stop, Limit Switches for travel (end stops), Bumpers
	Facultatif	Anti-Sway System, Weigh Indicator, Advanced Collision Avoidance, CCTV	Anti-Sway System, Weigh Indicator, Advanced Collision Avoidance, CCTV, Maintenance Walkway
Hoist	Type	Electric Wire Rope Hoist	Electric Wire Rope Hoist
Normes	Conception & Fabrication	OIN 9001, FEM 1.001, AMC 70/80, ASME B30.2/17	OIN 9001, FEM 1.001, AMC 70/80, ASME B30.2/17

Note: This is a general specification table. All values are subject to change based on technical design, hoist selection, and customer requirements. Please contact our engineering team for a detailed quotation and custom solution.

pont roulant bipoutre 35 tonnes

Why Choose Our 35-Ton Overhead Cranes?

Our cranes are engineered for performance, sécurité, and longevity.

1. Construction robuste: Built with high-quality steel and components from renowned manufacturers to ensure durability and long service life.
2. Premium Hoist & Controls: Equipped with reliable 35-ton capacity hoists featuring advanced safety systems like overload protection and dual braking. Smooth variable frequency control (VFD) allows for precise load positioning.
3. Safety as Standard: Every crane includes essential safety features including overload limit switches, boutons d'arrêt d'urgence, end approaches, and bumpers.
4. Personnalisation: We offer tailored solutions to meet your specific needs, including span, lifting height, control systems (pendant, radio remote, or cabin-operated), and environmental adaptations (Par exemple, for high heat or corrosion).
5. Conformité totale: Our cranes are designed and manufactured in accordance with international standards like ISO, FEM, and CMAA, ensuring quality and safety.

Applications Across Industries

Our 35-ton single and double girder cranes are vital assets in numerous sectors:

Steel Processing	Traiter les bobines, feuilles, and plates.
Fonderies	Moving molds, castings, and raw materials.
Heavy Machinery Manufacturing	Assembling large components.
Production d'électricité	Maintenance of turbines and transformers.
Shipbuilding & Aérospatial	Positioning large structural parts.

application

Conclusion: Making the Right Choice

The decision between a single and double girder overhead crane for your 35-ton needs depends on your specific application, facility constraints, and budget.

1. Choose a Single Girder Crane if you need a cost-effective solution for lighter duty cycles, have limited headroom, and operate within shorter spans.
2. Choose a Double Girder Crane for heavy-duty, frequent use, when you require maximum hook height, longer spans, and the ability to integrate specialized lifting attachments.

Contact us today to discuss your requirements. Our expert engineers will help you select the perfect 35-ton overhead crane system—single or double girder—to optimize your material handling efficiency, sécurité, and productivity.

cas