シングルおよびダブルガーダーオーバーヘッドクレーン 35 トン

A 35-ton overhead crane is a robust and essential piece of material handling equipment designed for heavy-duty industrial applications.

Capacity: Up to 35 トン
Bridge Span: Up to 30 meters (~100 ft)
揚程: Up to 30 meters (~100 ft)
上昇速度: 0.8 - 3.2 私/私 (2.6 - 10.5 ft/min)

電子メールを送信する今すぐチャット

目次見せる

Introduction to 35-Ton Overhead Cranes

Whether you choose a single or double girder configuration, these cranes provide the strength, reliability, and precision needed to move massive loads safely and efficiently in factories, 倉庫, foundries, and steel yards. Understanding the differences between single and double girder designs is crucial for selecting the right crane for your operational needs.

シングルおよびダブルガーダーオーバーヘッドクレーン 35 トン

シングルガーダー天井クレーン 35 トン: Efficiency and Economy

シングルガーダー天井クレーン 35 トン

The single girder overhead crane is characterized by a single bridge beam supported by two end trucks. The hoist and trolley operate on the bottom flange of the girder.

Key Features & 利点:

1. Cost-Effectiveness: Requires less material to manufacture, resulting in a lower initial investment and reduced operational costs for the supporting runway structure.
2. Space Efficiency: With a more compact design and lower headroom, it is ideal for facilities with height restrictions.
3. Ideal Applications: Perfect for workshops, 倉庫, and manufacturing plants where lifting capacity up to 35 tons is required for standard-duty cycles. It excels in tasks that involve precise but not excessively frequent lifting.
4. Ease of Installation & Maintenance: The simpler design translates to easier installation and lower long-term maintenance requirements.

Double Girder Overhead Crane 35 トン: Maximum Strength and Versatility

Double Girder Overhead Crane 35 トン

The double girder overhead crane features two bridge beams supported by end trucks. The hoist and trolley typically run on a rail installed on the top of the girders, offering superior hook height and lifting capabilities.

Key Features & 利点:

1. Superior Hook Height: The top-running design provides significantly greater hook lift, maximizing usable vertical space in your facility—a critical factor for heavy 35-ton loads.
2. Heavier Duty Cycles: Engineered for more intense, frequent, and severe service applications. It handles the 35-ton capacity with ease and is built for higher reliability under constant use.
3. Enhanced Durability & Longevity: The dual-girder construction offers greater structural integrity, reducing deflection and ensuring smoother operation under full load.
4. Advanced Options: More readily accommodates specialized features like magnet packages, grabs, or custom lifting attachments. It also allows for easy integration of a maintenance walkway along the bridge.

Technical Parameter Table: 35-Ton Overhead Cranes

This table outlines the standard specifications for our 35-ton Single and Double Girder Overhead Cranes. All parameters can be customized to meet specific application requirements.

Category	パラメータ	Single Girder Crane	Double Girder Crane
Capacity	定格荷重	35 トン / 70,000 ポンド	35 トン / 70,000 ポンド
スパン	Bridge Span	Up to 30 meters (~100 ft)	Up to 35 meters (~115 ft) or more
揚程	Hook Travel	Up to 30 meters (~100 ft)	Up to 30 meters (~100 ft) or more
Speed	上昇速度	0.8 – 3.2 私/私 (2.6 – 10.5 ft/min)	0.8 – 3.2 私/私 (2.6 – 10.5 ft/min)
	Trolley Travelling Speed	10 – 20 私/私 (32 – 65 ft/min)	10 – 20 私/私 (32 – 65 ft/min)
	Bridge Travelling Speed	20 – 40 私/私 (65 – 130 ft/min)	20 – 40 私/私 (65 – 130 ft/min)
コントロール	Control Mode	ペンダントコントロール / Radio Remote	ペンダントコントロール / Radio Remote / Cab
電源		3-段階, 50/60 Hz, 380V-480V or as per local standard	3-段階, 50/60 Hz, 380V-480V or as per local standard
Duty Class	(FEM / ISO Standard)	FEM 1Am / これ4 (Medium Duty)	FEM 2m / ISO M5 (ヘビーデューティ)
Ambient Temperature		-20°C to +40°C (-4°F to 104°F)	-20°C to +40°C (-4°F to 104°F)
Structural Design	Girder Type	Rolled Section / Welded Box Girder	Welded Box Girder
Headroom		Low Headroom	Standard Headroom
Safety Features	標準	Overload Limit Switch, Emergency Stop, Limit Switches for travel (end stops), Bumpers	Overload Limit Switch, Emergency Stop, Limit Switches for travel (end stops), Bumpers
	Optional	Anti-Sway System, Weigh Indicator, Advanced Collision Avoidance, CCTV	Anti-Sway System, Weigh Indicator, Advanced Collision Avoidance, CCTV, Maintenance Walkway
Hoist	Type	Electric Wire Rope Hoist	Electric Wire Rope Hoist
Standards	デザイン & 製造業	ISO 9001, FEM 1.001, CMAA 70/80, ASME B30.2/17	ISO 9001, FEM 1.001, CMAA 70/80, ASME B30.2/17

Note: This is a general specification table. All values are subject to change based on technical design, hoist selection, and customer requirements. Please contact our engineering team for a detailed quotation and custom solution.

double girder overhead crane 35 トン

Why Choose Our 35-Ton Overhead Cranes?

Our cranes are engineered for performance, 安全性, and longevity.

1. 堅牢な構造: Built with high-quality steel and components from renowned manufacturers to ensure durability and long service life.
2. Premium Hoist & Controls: Equipped with reliable 35-ton capacity hoists featuring advanced safety systems like overload protection and dual braking. Smooth variable frequency control (VFD) allows for precise load positioning.
3. Safety as Standard: Every crane includes essential safety features including overload limit switches, emergency stop buttons, end approaches, and bumpers.
4. カスタマイズ: We offer tailored solutions to meet your specific needs, including span, lifting height, control systems (pendant, radio remote, or cabin-operated), and environmental adaptations (例えば, for high heat or corrosion).
5. Full Compliance: Our cranes are designed and manufactured in accordance with international standards like ISO, FEM, and CMAA, ensuring quality and safety.

Applications Across Industries

Our 35-ton single and double girder cranes are vital assets in numerous sectors:

Steel Processing	Handling coils, sheets, and plates.
Foundries	Moving molds, castings, and raw materials.
Heavy Machinery Manufacturing	Assembling large components.
Power Generation	Maintenance of turbines and transformers.
Shipbuilding & Aerospace	Positioning large structural parts.

Conclusion: Making the Right Choice

The decision between a single and double girder overhead crane for your 35-ton needs depends on your specific application, facility constraints, and budget.

1. Choose a Single Girder Crane if you need a cost-effective solution for lighter duty cycles, have limited headroom, and operate within shorter spans.
2. Choose a Double Girder Crane for heavy-duty, frequent use, when you require maximum hook height, longer spans, and the ability to integrate specialized lifting attachments.

Contact us today to discuss your requirements. Our expert engineers will help you select the perfect 35-ton overhead crane system—single or double girder—to optimize your material handling efficiency, 安全性, and productivity.