Single And Double Girder Overhead Crane 35 Tonnellate

A 35-ton overhead crane is a robust and essential piece of material handling equipment designed for heavy-duty industrial applications.

Capacity: Fino a 35 Tonnellate
Bridge Span: Fino a 30 metri (~100 ft)
Altezza di sollevamento: Fino a 30 metri (~100 ft)
Velocità di sollevamento: 0.8 - 3.2 m/mio (2.6 - 10.5 ft/min)

Invia email Chatta ora

Sommario Spettacolo

Introduction to 35-Ton Overhead Cranes

Whether you choose a single or double girder configuration, these cranes provide the strength, affidabilità, and precision needed to move massive loads safely and efficiently in factories, magazzini, fonderie, and steel yards. Understanding the differences between single and double girder designs is crucial for selecting the right crane for your operational needs.

single and double girder overhead crane 35 tonnellate

Gru a ponte monotrave 35 Tonnellate: Efficiency and Economy

Gru a ponte monotrave 35 Tonnellate

The single girder overhead crane is characterized by a single bridge beam supported by two end trucks. The hoist and trolley operate on the bottom flange of the girder.

Key Features & Vantaggi:

1. Cost-Effectiveness: Requires less material to manufacture, resulting in a lower initial investment and reduced operational costs for the supporting runway structure.
2. Space Efficiency: With a more compact design and lower headroom, it is ideal for facilities with height restrictions.
3. Ideal Applications: Perfect for workshops, magazzini, and manufacturing plants where lifting capacity up to 35 tons is required for standard-duty cycles. It excels in tasks that involve precise but not excessively frequent lifting.
4. Ease of Installation & Manutenzione: The simpler design translates to easier installation and lower long-term maintenance requirements.

Double Girder Overhead Crane 35 Tonnellate: Maximum Strength and Versatility

Double Girder Overhead Crane 35 Tonnellate

The double girder overhead crane features two bridge beams supported by end trucks. The hoist and trolley typically run on a rail installed on the top of the girders, offering superior hook height and lifting capabilities.

Key Features & Vantaggi:

1. Superior Hook Height: The top-running design provides significantly greater hook lift, maximizing usable vertical space in your facility—a critical factor for heavy 35-ton loads.
2. Heavier Duty Cycles: Engineered for more intense, frequent, and severe service applications. It handles the 35-ton capacity with ease and is built for higher reliability under constant use.
3. Enhanced Durability & Longevity: The dual-girder construction offers greater structural integrity, reducing deflection and ensuring smoother operation under full load.
4. Advanced Options: More readily accommodates specialized features like magnet packages, afferra, or custom lifting attachments. It also allows for easy integration of a maintenance walkway along the bridge.

Technical Parameter Table: 35-Ton Overhead Cranes

This table outlines the standard specifications for our 35-ton Single and Double Girder Overhead Cranes. All parameters can be customized to meet specific application requirements.

Category	Parametro	Single Girder Crane	Double Girder Crane
Capacity	Rated Load	35 tonnellate / 70,000 libbre	35 tonnellate / 70,000 libbre
Durata	Bridge Span	Fino a 30 metri (~100 ft)	Fino a 35 metri (~115 ft) or more
Altezza di sollevamento	Hook Travel	Fino a 30 metri (~100 ft)	Fino a 30 metri (~100 ft) or more
Velocità	Velocità di sollevamento	0.8 – 3.2 m/mio (2.6 – 10.5 ft/min)	0.8 – 3.2 m/mio (2.6 – 10.5 ft/min)
	Trolley Travelling Speed	10 – 20 m/mio (32 – 65 ft/min)	10 – 20 m/mio (32 – 65 ft/min)
	Bridge Travelling Speed	20 – 40 m/mio (65 – 130 ft/min)	20 – 40 m/mio (65 – 130 ft/min)
Controllare	Modalità di controllo	Controllo pendente / Radiocomando	Controllo pendente / Radiocomando / Cab
Alimentazione elettrica		3-Fase, 50/60 Hz, 380V-480V or as per local standard	3-Fase, 50/60 Hz, 380V-480V or as per local standard
Classe di servizio	(FEM / ISO Standard)	FEM 1:00 / QUESTO4 (Medium Duty)	FEM2m / ISO M5 (Servizio pesante)
Temperatura ambiente		-20°C fino a +40°C (-4°F to 104°F)	-20°C fino a +40°C (-4°F to 104°F)
Progettazione strutturale	Tipo di trave	Rolled Section / Welded Box Girder	Welded Box Girder
Headroom		Altezza libera bassa	Standard Headroom
Caratteristiche di sicurezza	Standard	Interruttore di limite di sovraccarico, Arresto di emergenza, Limit Switches for travel (end stops), Bumpers	Interruttore di limite di sovraccarico, Arresto di emergenza, Limit Switches for travel (end stops), Bumpers
	Opzionale	Anti-Sway System, Weigh Indicator, Advanced Collision Avoidance, CCTV	Anti-Sway System, Weigh Indicator, Advanced Collision Avoidance, CCTV, Maintenance Walkway
Paranco	Type	Paranco elettrico a fune metallica	Paranco elettrico a fune metallica
Standard	Design & Produzione	ISO 9001, FEM 1.001, CMAA 70/80, ASME B30.2/17	ISO 9001, FEM 1.001, CMAA 70/80, ASME B30.2/17

Nota: This is a general specification table. All values are subject to change based on technical design, hoist selection, and customer requirements. Please contact our engineering team for a detailed quotation and custom solution.

double girder overhead crane 35 tonnellate

Why Choose Our 35-Ton Overhead Cranes?

Our cranes are engineered for performance, sicurezza, e longevità.

1. Costruzione robusta: Built with high-quality steel and components from renowned manufacturers to ensure durability and long service life.
2. Premium Hoist & Controls: Equipped with reliable 35-ton capacity hoists featuring advanced safety systems like overload protection and dual braking. Smooth variable frequency control (VFD) allows for precise load positioning.
3. Safety as Standard: Every crane includes essential safety features including overload limit switches, pulsanti di arresto di emergenza, end approaches, and bumpers.
4. Personalizzazione: We offer tailored solutions to meet your specific needs, including span, altezza di sollevamento, control systems (pendant, radio remote, or cabin-operated), and environmental adaptations (per esempio., for high heat or corrosion).
5. Full Compliance: Our cranes are designed and manufactured in accordance with international standards like ISO, FEM, and CMAA, ensuring quality and safety.

Applications Across Industries

Our 35-ton single and double girder cranes are vital assets in numerous sectors:

Steel Processing	Handling coils, sheets, and plates.
Fonderie	Moving molds, castings, and raw materials.
Heavy Machinery Manufacturing	Assembling large components.
Power Generation	Maintenance of turbines and transformers.
Costruzione navale & Aerospace	Positioning large structural parts.

applicazione

Conclusion: Making the Right Choice

The decision between a single and double girder overhead crane for your 35-ton needs depends on your specific application, facility constraints, and budget.

1. Choose a Single Girder Crane if you need a cost-effective solution for lighter duty cycles, have limited headroom, and operate within shorter spans.
2. Choose a Double Girder Crane for heavy-duty, frequent use, when you require maximum hook height, campate più lunghe, and the ability to integrate specialized lifting attachments.

Contact us today to discuss your requirements. Our expert engineers will help you select the perfect 35-ton overhead crane system—single or double girder—to optimize your material handling efficiency, sicurezza, and productivity.

caso